Why it gets dirty: Concrete is porous and absorbs organic matter, tire marks, oil, and airborne pollutants. Mold and algae love the texture and moisture retention.

Why high pressure works: Concrete is dense and reinforced. It can handle 3,000+ PSI without damage. The pores need aggressive cleaning to lift embedded grime.

The process: Pre-treat with degreasers/algaecides, allow dwell time, then surface clean with a controlled high-pressure rotary tool for even results without striping.

Why it's painted: Pool decks and some patios are painted with textured coatings specifically to prevent slipping when wet. This paint creates a protective, slip-resistant layer over the concrete.

Why soft wash only: High pressure strips away paint and the textured coating, leaving bare concrete that becomes dangerously slick when wet. Once the paint is damaged, you're looking at expensive recoating—not just a cleaning bill.

The process: Soft wash with cleaning solutions that kill algae and mold without any pressure damage. The paint stays intact, the texture remains, and your pool deck is clean AND safe to walk on.

Why it gets dirty: Siding collects organic growth (mold, mildew, algae), spider webs, dirt, and pollen. North-facing walls stay damp longer and stain faster.

Why soft wash: High pressure can crack vinyl, dent aluminum, force water behind siding into walls, and void manufacturer warranties. The staining is biological—pressure doesn't kill it, chemicals do.

The process: Cover outlets/openings, pre-rinse plants, apply biodegradable cleaning solution, let it dwell and kill organic growth, then low-pressure rinse. Clean AND sanitized.

Why it gets dirty: Those black streaks are Gloeocapsa Magma—a cyanobacteria that feeds on limestone in shingles. It's alive and spreading, not just dirt.

Why NEVER pressure: Pressure washing removes granules from shingles (reducing lifespan by years), cracks tiles, and voids every roofing warranty. Industry standard is soft wash ONLY.

The process: Apply specialized roof cleaning solution that kills the bacteria. It does the work—no scrubbing, no pressure. Rinse gently. The roof stays intact and clean for years.

Why it gets dirty: Natural stone is porous and often unsealed. It absorbs organic staining quickly. Efflorescence (white mineral deposits) is also common.

Why special care: These stones are SOFT. High pressure etches the surface permanently, removes natural texture, and can break apart mortar joints. Acidic cleaners can eat the stone itself.

The process: pH-neutral or stone-safe cleaning solutions, gentle application, appropriate dwell time, and low-pressure rinse. Treated like the investment it is.

Why traditional methods: Pressure washers risk cracking glass, destroying seals, and forcing water into walls. The "clean" you get is often streaky and short-lived.

The process: Professional mop and squeegee technique. Cleaning solution applied with a scrubber, then squeegeed for a perfectly streak-free finish. Frames, sills, and tracks detailed too.

Why hand cleaning: Blowing debris out of gutters just relocates the mess. Pressure washing can dent gutters and doesn't address clogs.

The process: Remove debris by hand, blow out remaining material, bag everything (no piles left on your lawn), rinse the gutters, and ensure every downspout is 100% clear. Full service.